Isofloc cellulose insulation – technical data

Technical data

Official technical approval numbers, water-vapour diffusion resistance factor, building materials class /fire classification, specific thermal capacity, thermal conductivity, normal moisture content.....

We have provided all the technical details in an easy to read table!

isofloc L    
Approval number German Institute for Buiding Technology (DIBt)   Z-23.11-280
Thermal conductivity λ (DIN 4108)   0.040 W / m x K
Specific thermal capacity c (J / kg x K)   2150
Water-vapour diffusion resistance factor µ   1-2
Normal moisture content   8-10% at 50% relative humidity
16-18% at 80% relative humidity
Fire Resistance    
Building materials class/fire classification (DIN 4102-1)   B2 (flammable) smoulders on flame application, non-burning, does not melt or drip.
Euro class (EN 13501-1)   E
Self-ignition point   ca. 280° C
max. continuous temperature   60° C
max. short-term peak temperature   90° C
Building components (Fire resistance class)   F30-F90 for all building components
Acoustic insulation/sound-proofing properties   Test certification of the degree of sound absorption, the longitudinal flow resistance and the dynamic stiffness/rigidity are available.
Test certifications for many building components with various cladding variants and insulation thicknesses are available.
Densities according to area applied - as per technical approval    
Exposed   30-50 kg / m³
Filling of voids   40-60 kg / m³
Maximum densities for structural calculations   Ceiling/floor: 45 kg / m³
Roof: 55 kg / m³
Wall: 60 kg / m³
Durability   Settle-fast at the prescribed installation densities. Resistant to destruction by rodents and insects.
Quality assurance   Third-party control by  MPA NRW (Ü) comprehensive self-monitoring, Building site attestation from trained specialist installation companies, sample controls on completed buildings
Contents   92% homogenous graded newspaper, 8% Boric Acid and other ingredients
Production-related energy consumption   ca. 0.1 kWh / kg
Primary energy consumption incl. all processes   ca. 50 kWh / m³ (bei 50kg / m³)
Disposal   Re-use or the return to the manufacturer (homogenous material delivery). Thermal utilization, small, homogenous material batches according to the European Waste Catalogue. Waste Code No. 170602
Contaminated material to be disposed of according to the local regulations

Wenn Sie wollen, empfehlen Sie diese Seite weiter -

vielleicht ist sie auch für Bekannte von Ihnen von Interesse

you, the sender, are solely responsible for this mail submission!

. calculate: divide 6 : 2

My message to the insulation professionals

!
!

!
!
!

!
!
Data Protection
By sending this form you are agreeing to allow us to record and save you details. They will only be used in correspondence with you. We promise that your details will not be passed on or made available to any third-parties (Only in the case that you would like to make an appointment with an isofloc specialist company or specialist advisor will we advise these parties of your enquiry).

!
Anti-Spam measure

This precaution serves to avoid spam mails. Please read the letters and numbers in the Captcha-picture and type the code into the Captcha-field.


Captcha

!

 

Saving CO2

lichtblick.png

We are working and manufacturing without CO2- emission, our energy is coming from water power. Additionally isofloc is from the beginning the insulation with the least amount of imbodied energy.

nature-office-trans.jpg

Printing all of out handouts in a climate neutral manner is a concern

NaturEnergie_Logo.png

Also our web server is powered by water and is rated with an unmatched energy efficiency measured ever.

How thick should the insulating layer be?

As basic rule is: As thick as possible! This has less to do with the fact that we want to sell as much insulation as possible (naturally we are in business to sell insulation :-) ), but rather with the fact that over the years the recommendations for the optimum insulation thickness are continually being revised. This is because of

  • the ever increasing price of energy
  • and the associated rise in running costs for tenants

Therefore, such statements as “10cm are absolutely fine” are completely insufficient.

working with isofloc

...become a pro!

ads-karte.png

installer wanted?

find one!

verarbeiterkarte.jpg

Contact us:

Write or call.

Address:
isofloc Wärmedämmtechnik GmbH
Am Fieseler Werk 3
34253 Lohfelden
Germany

Telephone:
(+49) (0)561 - 951 72 - 0

Hotline:
(+49) (0)561 - 951 72 - 33

isofloc® - the insulation professionals - © 2007-2012